Electrolux ESL64010, User Manual

Page: 26 / 48

26 electrolux daily use
Cancelling the "delay start"
●
To cancel a delay start in progress
you have to reset the dishwasher.
●
Press simultaneously and keep
pressed the two programme
buttons positioned over the writing
Cancel, until all the programme
button lights will illuminate.
●
Cancelling a delay start involves
also the cancelling of the washing
programme set. In this case you
have to set the washing
programme again.
Cancel a washing programme in
progress
●
Open the dishwasher door; press
simultaneously and keep pressed
the two programme buttons
positioned over the writing Cancel,
until all the programme button
lights will illuminate. The washing
programme has been cancelled.
●
If a new washing programme is to
be selected, check that there is
detergent in the detergent
dispenser.
End of the washing programme
●
The dishwasher will automatically
stop and an audible signal informs
you of the end of the washing
programme.
●
Open the dishwasher door.
●
The end of programme indicator
light is illuminated.
●
The indicator light of the
programme just ended will remain
on.
1. Switch off the dishwasher by
pressing the On/Off button.
2. Leave the dishwasher door ajar
and wait a few minutes before
removing the dishes; in this way
they will be cooler and the drying
will be improved.
Unloading the dishwasher
●
Hot dishes are sensitive to knocks.
The dishes should therefore be
allowed to cool down before
removing from the appliance.
●
Empty the lower basket first and
then the upper one; this will avoid
water dripping from the upper
basket onto the dishes in the lower
one.
●
Water may appear on the sides
and the door of the dishwasher as
the stainless steel will eventually
become cooler than the dishes.
When the washing programme has
finished, it is recommended that
the dishwasher is unplugged and
the water tap turned off.
117992 59/0en 4-12-2006 10:01 Pagina 26