background image

Water hardness

Water softener

adjustment

German

degrees

(°dH)

French

degrees

(°fH)

mmol/l

Clarke

degrees

Manual

Elec-

tronic

43 - 50

76 - 90

7.6 - 9.0

53 - 63

1)

9

37 - 42

65 - 75

6.5 - 7.5

46 - 52

2

1)

8

29 - 36

51 - 64

5.1 - 6.4

36 - 45

2

1)

7

23 - 28

40 - 50

4.0 - 5.0

28 - 35

2

1)

6

19 - 22

33 - 39

3.3 - 3.9

23 - 27

2

1)

5

1)

15 - 18

26 - 32

2.6 - 3.2

18 - 22

1

4

11 - 14

19 - 25

1.9 - 2.5

13 - 17

1

3

4 - 10

7 - 18

0.7 - 1.8

5 - 12

1

2

< 4

< 7

< 0.7

< 5

1

2)

1

2)

1) 

Factory position.

2) 

Do not use salt at this level.

You must adjust the water soften-
er manually and electronically.

Manual adjustment

Turn the water hardness dial to the posi-
tion 1 or 2.

6.2 

Electronic adjustment

1.

Press the on/off button to activate the
appliance.

2.

If necessary, do the Reset function.

3.

Press and hold 

Program

 until the pro-

gramme indicator 

 starts to

flash and the programme indicator

 comes on with fixed light.

4.

Wait until the programme indicator

 goes off and the end indicator

starts to flash. The programme indica-
tor 

 continues to flash.

5.

Press 

Program

. The end indicator

starts to flash. The intermittent flashing
of the end indicator refers to the cur-
rent set level.
• E.g. 5 f pause + 5 flashes =

level 5.

6.

Press 

Program

 again and again to

change the setting. Each time you
press 

Program

 the level number in-

creases.

7.

Press the on/off button to deactivate
the appliance and to confirm the set-
ting.

8

www.electrolux.com

Summary of Contents for ESL6210LO

















Reviews: