background image

Indicators

Description

Salt indicator. It is always off while the programme operates.

4. 

PROGRAMMES

Programme

1)

Degree of
soil
Type of load

Programme
phases

Duration
(min)

Energy
(kWh)

Water
(l)

 

2)

Normal soil
Crockery and
cutlery

Prewash
Wash 50 °C
Rinses
Dry

130 - 140 1.0 -

1.2

14 - 16

Normal soil
Crockery and
cutlery

Wash 65 °C
Rinses
Dry

100 - 110 1.4 -

1.6

19 - 21

 

3)

Heavy soil
Crockery, cut-
lery, pots and
pans

Prewash
Wash 70 °C
Rinses
Dry

120 - 130 1.8 -

2.0

22 - 24

 

4)

Fresh soil
Crockery and
cutlery

Wash 65 °C
Rinse

30

0.9

9

 

5)

All

Prewash

12

0.1

5

1) 

The pressure and the temperature of the water, the variations of the mains supply, the

options and the quantity of dishes can change the programme duration and the
consumption values.

2) 

With this programme you have the most efficient use of water and energy consumption for

crockery and cutlery with normal soil. (This is the standard programme for test institutes).

3) 

This programme has a high temperature rinsing phase for better hygiene results. During the

rinsing phase, the temperature stays at 70 °C for 10 to 14 minutes.

4) 

With this programme you can wash a load with fresh soil. It gives good washing results in a

short time.

5) 

Use this programme to quickly rinse the dishes. This prevents the remaining food to bond

on the dishes and bad odours to come out from the appliance.
Do not use detergent with this programme.

Information for test institutes

For all the necessary information for test performance. send an email to:

[email protected]

Write down the product number (PNC) that is on the rating plate.

6

www.electrolux.com

Summary of Contents for ESL6210LO

















Reviews: