2)
Do not use salt at this level.
You must adjust the water soften-
er manually and electronically.
Manual adjustment
Turn the water hardness dial to the posi-
tion 1 or 2.
6.2
Electronic adjustment
1.
Press the on/off button to activate the
appliance.
2.
If necessary, do the Reset function.
3.
Press and hold
Program
until the pro-
gramme indicator
starts to
flash and the programme indicator
comes on with fixed light.
4.
Wait until the programme indicator
goes off and the end indicator
starts to flash. The programme indica-
tor
continues to flash.
5.
Press
Program
. The end indicator
starts to flash. The intermittent flashing
of the end indicator refers to the cur-
rent set level.
• E.g. 5 f pause + 5 flashes =
level 5.
6.
Press
Program
again and again to
change the setting. Each time you
press
Program
the level number in-
creases.
7.
Press the on/off button to deactivate
the appliance and to confirm the set-
ting.
6.3
Filling the salt container
1.
Turn the cap counterclockwise and
open the salt container.
2.
Put 1 litre of water in the salt contain-
er (only for the first time).
3.
Fill the salt container with dishwasher
salt.
4.
Remove the salt around the opening
of the salt container.
5.
Turn the cap clockwise to close the
salt container.
CAUTION!
Water and salt can come out from
the salt container when you fill it.
Risk of corrosion. To prevent it,
after you fill the salt container,
start a programme.
8
www.electrolux.com
