4.
Press immediately
Program
.
• The programme indicator
comes on with fixed light.
•
The programme indicator
starts to flash.
5.
Wait until the programme indicator
goes off. The programme indi-
cator
continues to flash.
6.
Press
Program
. The end indicator
comes on. The acoustic signal for the
end of programme is activated.
7.
Press the on/off button to deactivate
the appliance and to confirm the set-
ting.
How to deactivate again the acoustic
signal for the end of programme
1.
Refer to “How to activate the acoustic
signal for the end of programme” and
follow the procedure from step (1) to
step (5). The end indicator is on.
2.
Press
Program
. The end indicator
goes off. The acoustic signal for the
end of programme is deactivated.
3.
Press the on/off button to deactivate
the appliance and to confirm the set-
ting.
6.
BEFORE FIRST USE
1.
Make sure that the set level of the wa-
ter softener agrees with the water
hardness in your area. If not, adjust
the water softener. Contact your local
water authority to know the water
hardness in your area.
2.
Fill the salt container.
3.
Fill the rinse aid dispenser.
4.
Open the water tap.
5.
Processing residues can stay in the
appliance. Start a programme to re-
move them. Do not use detergent and
do not load the baskets.
6.1
Adjusting the water softener
Water hardness
Water softener
adjustment
German
degrees
(°dH)
French
degrees
(°fH)
mmol/l
Clarke
degrees
Manual
Elec-
tronic
51 - 70
91 - 125
9.1 - 12.5
64 - 88
2
1)
10
43 - 50
76 - 90
7.6 - 9.0
53 - 63
2
1)
9
37 - 42
65 - 75
6.5 - 7.5
46 - 52
2
1)
8
29 - 36
51 - 64
5.1 - 6.4
36 - 45
2
1)
7
23 - 28
40 - 50
4.0 - 5.0
28 - 35
2
1)
6
19 - 22
33 - 39
3.3 - 3.9
23 - 27
2
1)
5
1)
15 - 18
26 - 32
2.6 - 3.2
18 - 22
1
4
11 - 14
19 - 25
1.9 - 2.5
13 - 17
1
3
4 - 10
7 - 18
0.7 - 1.8
5 - 12
1
2
< 4
< 7
< 0.7
< 5
1
2)
1
2)
1)
Factory position.
ENGLISH
7
