Electrolux ESL 414, Instruction Book

Page: 15 / 32

Internal cleaning
Ensure that the seals around the door, the detergent and
rinse aid dispensers are cleaned regularly with a damp
cloth.
We recommend the use of Finish Dishwasher Cleaner
every 3 months or run a 65°C wash without dishes using
detergent. Regular use of Finish Dishwasher Cleaner
cleans inaccessible parts, eliminates unpleasant food
odours and helps prevent the build-up of limescale.
Cleaning the central filters
(After each wash)
Inspect the central filters (B) and (C) and remove any
scraps of food with a brush, under running water.
Filters (B) and (C) are both removed by lifting up the
outer one (B) (pulling the central funnel upwards); the
smaller filter (C) can be removed by pressing the two
tongues (D).
Once cleaned, refit the filters by pressing
them down until they click into place.
Cleaning the large filter
(Once a month)
Clean the large filter (A) on both sides under running
water, using a brush.
To take it out, remove the spray arm by pressing the two
tongues (E), turn the ring (F) anticlockwise and then
slide the whole part out. Refit the filter following the
above instructions in reverse order.
The dishwasher must not be used
without filters.
Incorrect repositioning and fitting of
the filters will produce poor washing
results.
Cleaning the filters is vital to ensure
correct operation of the machine.
Maintenance and cleaning
15
PMC01UK
MA13
B
C
D
MA08
MA01
F
A
E