background image

Loading your appliance

Before placing dishes in the machine, remove any scraps
of food, to avoid clogging the filters and consequently
reducing the performance.

Do not load very small items which
can fall through the baskets.

Open the door and slide out the baskets to load the
dishes. 

The lower basket 

The lower basket is designed to take saucepans, lids,
plates (up to 27 cm in diameter), salad bowls, cutlery
etc. 

Serving dishes and large lids should be arranged around
the edge of the basket, ensuring that the upper spray arm
can turn freely.

The cutlery basket 

Long bladed knives stored in an
upright position are a potential
hazard.

Long and/or sharp items of cutlery
such as carvings knives must be
positioned horizontally in the upper
basket.

Take care when loading or unloading
sharp items such as knives.

Cutlery should be placed in the removable cutlery
basket with the handles facing downwards. If the
handles protrude from the bottom of the basket,
obstructing the lower spray arm, load the cutlery with
the handles facing upwards. 

Mix spoons with other cutlery to prevent them from
sticking together. 

Silver cutlery tends to go black if mixed with steel
cutlery. Place it in the cutlery basket separate from the
others.

Using your appliance

10

PBA01UK

IEC 436 / DIN 44990

UI28

UI32

Summary of Contents for ESL 414

































Reviews: