Electrolux ESI 68850, User Manual

Page: 35 / 52

something not working electrolux 35
The dishwasher will not start or stops during operation.
Certain problems are due to the lack of simple maintenance or oversights,
which can be solved with the help of the indications described in the chart,
without calling out an engineer.
Open the door and carry out the following suggested corrective actions.
Displayed message Possible cause and solution
●
The water tap is blocked or furred with
limescale.
Clean the water tap.
●
The water inlet hose has not been
correctly laid or it is bent or squashed.
Check the water drain hose connection.
●
The filter (where present) in the threaded
hose fitting at the water inlet valve is
blocked.
Clean the filter in the threaded hose.
●
The water tap is turned off.
Turn the water tap on.
●
The sink spigot is blocked.
Clean out the sink spigot.
●
The water drain hose has not been
correctly laid or it is bent or squashed.
Check the water drain hose connection.
●
Close the water tap and contact your
local Service Force Centre.
Something not working
Remember to switch off the appliance before carrying out any corrective action.
117989 52/0en 17-02-2007 8:37 Pagina 35