manualshive.com logo in svg

Electrolux ESI 68850, User Manual

Share
Download
Electrolux ESI 68850 User Manual Download Page 28

28 electrolux daily use

Set and start a washing programme

1. Check that the baskets have been

loaded correctly and that the spray
arms are free to rotate

2. Check that the water tap is opened

3. Press the On/Off button; the light

bar illuminates.

4. Close the dishwasher door.

The last performed washing
programme will be automatically
proposed.

5. Select the washing programme.

6. If required, postpone the start/end

time of the washing programme.

7. Set, if required, available options. 

8. Press the Start button to start the

running of the programme.

If in this phase, one or both of
the following messages are
displayed:

it is anyway possible to carry
out the washing programme by
pressing the OK button .

If the start/end of the programme has
been postponed, in the display will
appear the time duration of the
programme and the end time of the
programme.

Once the programme is running
the display shows: 

●

the phases of the progress of the 
programme,

●

updates the running time and the 
ending time of the programme.

117989 52/0en  17-02-2007  8:37  Pagina 28

Summary of Contents for ESI 68850





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands