9
Adding special salt
To decalcify the water softener, it must be filled up
with special salt. Use only special salt suitable for
domestic dishwashers.
If you do not use 3 in1 detergent, fill up with special
salt:
–
Before using the dishwasher for the first time.
–
When the control indicator for special salt is illumi-
nated on the control panel.
1.
Open the door and remove the lower basket.
2.
Screw open the lid on the salt dispenser by turning
it anti-clockwise.
3.
Only when using the dishwasher for the first
time:
Fill the salt dispenser with water.
4.
Place the funnel (supplied) over the dispenser
opening.
Fill the dispenser with special salt; the capacity of
the dispenser is approx. 1.0-1.5 kg, depending on
the size of the grains. Do not overfill the dispenser.
3
If water overflows when filling up with special
salt, this is completely harmless.
5.
Clean away any salt remnants from the dispenser
opening.
6.
Screw the lid back on in a clockwise direction.
7.
Run a dishwashing cycle after filling the salt
dispenser with special salt.
This will wash away
salt water and salt crystals that have been spilt.
3
Depending on the size of the salt grains, it can
take several hours for the salt to dissolve in
the water and for the control indicator for spe-
cial salt to go out.
Water hardness
Adjusting the hardness setting
Number of
flashes
in °d
1)
in mmol/l
2)
Range
Manual
Electronic
51 - 70
43 - 50
37 - 42
29 - 36
23 - 28
9,0 - 12,5
7,6 - 8,9
6,5 - 7,5
5,1 - 6,4
4,0 - 5,0
IV
1
10
3)
9
8
7
6
10
9
8
7
6
0*
19 - 22
15 - 18
3,3 - 3,9
2,6 - 3,2
III
5
4*
5
4
11 - 14
1,9 - 2,5
II
3
3
4 - 10
0,7 - 1,8
I/II
2
2
below 4
below 0.7
I
1
no salt necessary
1
1) (°d) German degree, measure of the hardness of water
2) [mmol/l] millimol per litre, international unit for water hardness
3) On this setting the length of the dishwashing cycle may be slightly longer.
*) factory setting
