Water hardness
Water softener
adjustment
German
degrees
(°dH)
French
degrees
(°fH)
mmol/l
Clarke
degrees
Manual
Elec-
tronic
< 4
< 7
< 0.7
< 5
1
2)
1
2)
1)
Factory position.
2)
Do not use salt at this level.
You must adjust the water soften-
er manually and electronically.
Manual adjustment
Turn the water hardness dial to the posi-
tion 1 or 2.
Electronic adjustment
1.
Press the on/off button to activate the
appliance. Make sure that the appli-
ance is in setting mode, refer to ‘SET-
TING AND STARTING A PRO-
GRAMME’.
2.
Press and hold function buttons (
B
)
and (
C
) at the same time until the pro-
gramme indicators above function
buttons (
A
), (
B
) and (
C
) start to flash.
3.
Press function button (
A
).
• The programme indicators above
function buttons (
B
) and (
C
) go off.
• The programme indicator above
function button (
A
) continues to
flash.
• The end indicator starts to flash.
The number of flashes shows the
current level of the water softener:
– E.g. 5 f pause + 5 flashes
= level 5.
4.
Press function button (
A
) again and
again to change the setting. Each time
you press function button (
A
) you go
to the next level.
5.
Deactivate the appliance to confirm
the setting.
8
www.electrolux.com
Downloaded from DishWasher-Manual.com Manuals
Summary of Contents for ESI 45010
Page 49: ...SVENSKA 49 Downloaded from DishWasher Manual com Manuals ...
Page 50: ...50 www electrolux com Downloaded from DishWasher Manual com Manuals ...
Page 51: ...SVENSKA 51 Downloaded from DishWasher Manual com Manuals ...
Page 52: ...www electrolux com shop 117962742 B 212012 Downloaded from DishWasher Manual com Manuals ...
