background image

9. 

DAILY USE

1.

Open the water tap.

2.

Press the on/off button to activate the

appliance.

Make sure that the appliance is in

programme selection mode.

• If the salt indicator is on, fill the salt

container.

• If the rinse aid indicator is on, fill

the rinse aid dispenser.

3.

Load the baskets.

4.

Add the detergent. If you use multi-

tablets, activate the option Multitab.

5.

Set and start the correct programme

for the type of load and the degree of

soil.

9.1 

Using the detergent

A

B

C

CAUTION!

Only use detergent

specifically designed for

dishwashers.

1.

Press the release button (

A

) to open

the lid (

C

).

2.

Put the detergent, in powder or

tablets, in the compartment (

B

).

3.

If the programme has a prewash

phase, put a small quantity of

detergent on the inner part of the

appliance door.

4.

Close the lid. Make sure that the lid

locks into position.

9.2 

Setting and starting a

programme

The Auto Off function

This function decreases energy

consumption by deactivating automatically

the appliance when it is not operating.
The function comes into operation:

• 5 minutes after the completion of the

programme.

• After 5 minutes if the programme has

not started.

Starting a programme

1.

Press the on/off button to activate the

appliance. Make sure that the

appliance is in programme selection

mode.

2.

Close the appliance door.

3.

Press 

Program

 again and again until

the indicator of the programme you

want to select comes on.

• If you want to select the

MyFavourite programme, press

and hold 

Program

 until the

MyFavourite setting comes on.

The display shows the programme

duration.

4.

Set the applicable options.

5.

Press 

Start

 to start the programme.

• The washing phase indicator

comes on .

• The programme duration starts to

decrease with steps of 1 minute.

Starting a programme with delay

start

1.

Set a programme.

2.

Press 

Delay

 again and again until the

display shows the delay time you want

to set (from 1 to 24 hours).

The indicator of the selected programme

flashes.

3.

Press 

Start

 to start the countdown.

• The indicator of the selected

programme is on with fixed light.

ENGLISH

13

Summary of Contents for ESF 8620ROX





















Reviews: