Electrolux ESF 66860, User Manual

Page: 16 / 20

2. Pull the worktop from the behind of the
appliance (2).
3. Lift the worktop and move it from the front
slots (3).
4. Use the adjustable feet to adjust the level
of the appliance.
5. Install the appliance under the kitchen
worktop. Do not squash or bend the wa-
ter hoses during the installation.
To adjust the level of the appliance
A correct level of the appliance lets the door
to close and seal correctly.
With an incorrect appliance level, the door
does catches on the sides of the cabinet.
Loosen or tighten the adjustable feet to make
the appliance level.
Water drain connection
Connect the water drain hose to:
• The sink spigot and attach it under the
work surface. This prevents that the waste
water from the sink goes back into the ap-
pliance.
• A stand pipe with vent-hole. The internal
diameter must be minimum 4 cm.
max 85 cm
min 40 cm
max 400 cm
Remove the sink plug when the appliance
drains the water to prevent that the water
goes back into the appliance.
The drain hose extension must not be longer
than 2 m. The internal diameter must not be
smaller than the diameter of the hose.
If you connect the water drain hose to a trap
spigot under the sink, remove the plastic
membrane (A). If you do not remove the
membrane, remaining food can cause a
blockage in the drain hose spigot
A safety device impedes the dirty water
to go back into the appliance. If, the spi-
got of the sink has a 'non-return valve',
this can cause the appliance to drain in-
correctly. Remove the non-return valve.
16 electrolux