The washing results and drying results are not satisfactory
Problem
Possible cause
Possible solution
The dishes are not clean.
The selected washing pro-
gramme was not applicable for
the type of load and soil.
Make sure that the washing pro-
gramme is applicable for the
type of load and soil.
The baskets were not loaded
correctly, water did not touch all
surfaces.
Load the baskets correctly.
The spray arms could not turn
freely because of incorrect ar-
rangement of the load.
Make sure that an incorrect ar-
rangement of the load does not
cause a blockage of the spray
arms.
The filters are dirty or not as-
sembled and installed correctly.
Make sure that the filters are
clean and correctly assembled
and installed.
The quantity of detergent was
not sufficient or missing.
Make sure that the quantity of
detergent is sufficient.
Limescale particles on the
dishes.
The salt container is empty.
Fill the salt container with dish-
washer salt.
Incorrect water softener adjust-
ment
Adjust the water softener.
The salt container cap is not
closed correctly.
Make sure that the salt container
cap is closed correctly.
There are streaks, milky stains,
or a bluish layer on glasses and
dishes.
Rinse aid dosage is too high.
Decrease the rinse aid dosage.
Dry water drop stains on glasses
and dishes.
Rinse aid dosage is too low.
Increase the rinse aid dosage.
The detergent can be the cause.
Use a different brand of deter-
gent.
The dishes are wet.
You have set a washing pro-
gramme without drying phase or
with a decreased drying phase.
Let the door stay ajar for some
minutes before you remove the
dishes.
The dishes are wet and dull.
The rinse aid dispenser is emp-
ty.
Fill the rinse aid dispenser with
rinse aid.
The multitab function is on. (The
rinse aid dispenser is automati-
cally off).
Activate the rinse aid dispenser.
Refer to 'How to activate the
rinse aid dispenser'.
How to activate the rinse aid dispenser
1. Switch on the appliance.
2. Make sure that the appliance is in setting
mode.
3. Press and hold function buttons B and C.
– The indicator lights for function buttons
A, B, and C start to flash.
4. Release function buttons B and C.
5. Press function button B.
– The indicator lights for function buttons
A and C go off.
– The indicator light for function button B
continues to flash.
– The display shows the current set.
Rinse aid dispenser de-
activated
Rinse aid dispenser ac-
tivated
6. Press function button B again.
– The display shows the new adjust-
ment.
7. Switch off the appliance to keep the op-
eration.
14
electrolux
Summary of Contents for ESF 66860
Page 1: ...user manual Dishwasher ESF 66860 ...
Page 17: ...electrolux 17 ...
Page 18: ...18 electrolux ...
Page 19: ...electrolux 19 ...