background image

Fault codes and malfunction

Possible cause and solution

• continuous flashing of the light of the running

programme

• digital display shows 

The dishwasher does not fill with water

• The water tap is blocked or furred with lime-

scale.
Clean the water tap.

• The water tap is turned off.

Turn the water tap on.

• The filter (where present) in the water inlet hose

is blocked.
Clean the filter in the water inlet hose.

• The water inlet hose has not been correctly laid

or it is kinked or squashed.
Check the water inlet hose connection.

• continuous flashing of the light of the running

programme

• digital display shows 

The dishwasher will not drain

• The sink spigot is blocked.

Clean out the sink spigot.

• The water drain hose has not been correctly laid

or it is kinked or squashed.
Check the water drain hose connection.

• continuous flashing of the light of the running

programme

• digital display shows 

Anti-flood device is activated

• Close the water tap and contact your local

Service Force Centre.

Malfunction

Possible cause and solution

The programme does not start

• The dishwasher door has not been properly

closed.
Close the door.

• The main plug is not plugged in.

Insert the main plug

• The fuse has blown out in the household fuse

box.
Replace the fuse.

• Delay start has been set.

If dishes are to be washed immediately, cancel
the delay start.

Once these checks have been carried out
switch on the appliance.
The programme will continue from the point
at which it was interrupted.
If the malfunction or fault code reappears
contact your local Service Force Centre.
For other fault codes not described in the
above chart, please contact your local Serv-
ice Force Centre.
Contact your local Service Force Centre,
quoting the model (Mod.), product number
(PNC) and serial number (S.N.).

This information can be found on the rating
plate located on the side of the dishwasher
door.
So that you always have these numbers at
hand, we recommend you to make a note of
them here:
Mod. : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PNC : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S.N. : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

electrolux 

 19

Summary of Contents for ESF 46710





























Reviews: