manualshive.com logo in svg

Electrolux ESF 45010, User Manual

Share
Download
Electrolux ESF 45010 User Manual Download Page 9

control panel electrolux  9

The salt and rinse aid indicator
lights are never illuminated while a
washing programme is running
even if filling with salt and/or rinse
aid is necessary.

Programme in progress

Indicator lights

End of programme

Illuminates when a washing programme is set
and remains illuminated for all the duration of
the washing programme.

Turns off when the washing programme has
ended.

Illuminates when a washing programme has
ended. It also has added functions of visual
signalling as:
- the setting of the water softener,
- activation/deactivation of the rinse aid

dispenser,

- intervention of an alarm due to the

malfunction of the machine.

3 in 1 function

Indicates the activation/deactivation of the "3 in
1 function" (see "3 in 1 function").

Salt

Illuminates when the special salt has run out.

Rinse aid

Illuminates when the rinse aid has run out.

117997 87/1en  2-05-2007  11:32  Pagina 9

Summary of Contents for ESF 45010

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands