manualshive.com logo in svg

Electrolux ESF 45010, User Manual

Share
Download
Electrolux ESF 45010 User Manual Download Page 10

10 electrolux control panel

Setting mode

●

Press On/Off button, ALL
programme button lights are
illuminated and in the digital
display 3 horizontal lines are
visible = appliance in setting mode.

●

Press On/Off button, ONLY a
programme button light is
illuminated and in the digital
display 1 horizontal line is visible =
last performed or selected
programme still set. 
In this case, to return to setting
mode, the programme has to be
cancelled.

Always remember that when:

-

setting a washing programme,

-

setting the water softener,

-

activating/deactivating the rinse aid
dispenser,

the appliance MUST be in setting
mode.

Simultaneously press and hold the
two programme buttons positioned
over the word Cancel, until all the
programme button lights will illuminate
and in the digital display 3 horizontal
lines appear. 

The programme has been cancelled
and the machine is now in setting
mode.

117997 87/1en  2-05-2007  11:32  Pagina 10

Summary of Contents for ESF 45010

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands