Indicators
Rinse aid indicator. It comes on when it is necessary to fill the rinse aid dispens-
er.
USE OF THE APPLIANCE
1. Fill the salt container with dishwasher
salt.
2. Fill the rinse aid dispenser with rinse aid.
3. Load cutlery and dishes into the appli-
ance.
4. Open the water tap.
5. Set the correct washing programme for
the type of load and soil.
6. Fill the detergent dispenser with the cor-
rect quantity of detergent.
7. Start the washing programme.
USE OF DISHWASHER SALT
Hard water contains a high quantity of min-
erals that can cause damage to the appli-
ance and bad washing results. The water
softener neutralises these minerals.
To keep the water softener clean and in
good conditions make sure that there is
specific dishwasher salt in the salt contain-
er.
Contact your local water authority for infor-
mation about the water hardness in your
area.
Filling the salt container
1. Turn the cap counterclockwise and
open the salt container.
2. Fill the salt container with 1 litre of water
(only for the first time you fill with salt).
3. Use the funnel to fill the salt container
with salt.
4. Remove the salt around the opening of
the salt container.
5. Turn the cap clockwise to close the salt
container.
It is normal that water comes out from
the salt container when you fill it with
salt.
USE OF DETERGENT AND RINSE AID
USE OF DETERGENT
To help the environment, do not use
more than the recommended quantity
of detergent given by the detergent
manufacturer..
6
electrolux
