Electrolux ES11S Manual Download Page 3

Safety

For children
•  This appliance can be used by children aged from 8 years and above and 

persons with reduced physical, sensory or mental capabilities or lack of 
experience and knowledge only if they have been given supervision or 
instruction concerning using the appliance in a safe way and understanding 
the hazards involved.

•  Do not let children play with the appliance.
•  Keep all packaging items away from children.
•  If the appliance has a child safety device, we recommend you activate it.
•  Cleaning and user maintenance shall not be made by children without 

supervision.

•  Children of less than 8 years should be kept away unless continuously 

supervised.

General safety
•  It is most important that this instruction book should be retained with the 

appliance for future reference. Should the appliance be sold or transferred to 
another owner, or should you move to another house and leave the 
appliance, always ensure that the book is supplied with the appliance in 
order that the new owner can get to know the functioning of the appliance 
and the relevant warnings.

•  Correct functioning of your appliance does not only depend on product 

quality, but on correct installation by a qualified professional.

•  Never remove or damage stickers, warning labels or nameplates attached to 

the appliance.

•  A qualified technician carrying out the installation is obliged to observe 

applicable national standards and regulations concerning connection to the 
water distribution system and the electric network. The manufacturer is not 
responsible for any unprofessional or incorrect installation.

•  Check that the specifications written on the appliance’s identification plate 

are the same as those of the electrical power supply.

To reduce risk of injury and property damage, user must read this entire guide 
before assembling, installing and operating dispenser.
Failure to execute the instructions in this manual can cause personal injury or 
property damage.
This product dispenses water at very high temperatures. Failure to use properly 
can cause personal injury.
When operating this dispenser, always exercise basic safety precautions, 
including the following:

Installation
•  Obey the installation instruction supplied with the appliance.
•  Remove all the Packaging items.
•  Do not install or use a damaged appliance.
•  Before first time starting up, check the appliance for any damage incurred 

during transport.

•  Never remove or damage stickers, warning labels or nameplates attached to 

the appliance.

3

4

•  This appliance is manufactured and tested in accordance with valid 

regulations.

Electrical connection
•  Only plug the water dispenser directly in the 

current if it is correctly grounded and with the 
certain voltage.

•  Choose a place that is near a grounded 

electrical outlet.

•  Make sure the appliance is installed correctly. 

Loose and incorrect electricity mains cable or 
plug (if applicable) can make the terminal 
become too hot.

•  Make sure that the electrical information on 

the rating plate agrees with the power supply. 
If not, contact our Authorised Service Centre 
or an electrician.

•  The appliance have electrical switchs in the 

rear side which is set to turn ON or OFF the 
water heating and cooling system.

•  Do not use multi-plug adapters and extension cables.
•  Make sure not to cause damage to the mains plug (if applicable) or to the 

mains cable. Contact our Authorised Service Centre or an electrician to 
change a damaged mains cable.

Water connection
• Make sure to use a new water bottle.
• Make sure the water bottle not faulty - no leakage or holes.
• Make sure to install the bottle as in Catalogue.
• Make sure to use the proper capacity (<20) litre for the water bottle.

Summary of Contents for ES11S










Reviews: