Electrolux ERY1401AOW, User Manual, Page: 10 / 60

Problem Possible cause Solution
The room temperature is
too high. Decrease the room temper-
ature.
Water flows on the
rear plate of the re-
frigerator. During the automatic de-
frosting process, frost de-
frosts on the rear plate. This is correct.
Water flows into the
refrigerator. The water outlet is clog-
ged. Clean the water outlet.
Products prevent that wa-
ter flows into the water
collector. Make sure that products do
not touch the rear plate.
Water flows on the
ground. There is too much water in
the air deflector. Clean the air deflector.
The temperature in
the appliance is too
low. The temperature regulator
is not set correctly. Set a higher temperature.
The temperature in
the appliance is too
high. The temperature regulator
is not set correctly. Set a lower temperature.
The door is not closed
correctly. Refer to "Closing the door".
The product temperature
is too high. Let the product tempera-
ture decrease to room tem-
perature before storage.
Many products are stored
at the same time. Store less products at the
same time.
There is no cold air circu-
lation in the appliance. Make sure that there is cold
air circulation in the appli-
ance.
10 www.electrolux.com