15 ~ 20 s Power board software info P018E of the freezer/wine compartment
displayed.
The valve negative semiwave indicator on the testing device goes off 5
seconds after it is lighted up.
The fridge fan indicator on the testing device goes off 5 seconds after it
is lighted up.
Other load(s) off.
20 ~ 25 s Power board software info U903 of the freezer/wine compartment
displayed.
Wine compartment door indicator on the testing device goes off 5
seconds after it is lighted up.
Other load(s) off.
25 ~ 30 s Power board software info P018B of the fridge displayed.
The wine compartment fan indicator on the testing device goes off 5
seconds after it is lighted up.
Other load(s) off.
30 ~ 35 s Power board software info U001 of the fridge displayed.
The freezer fan indicator on the testing device goes off 5 seconds after it
is lighted up.
Other load(s) off.
35 ~ 40 s The freezer heater indicator on the testing device goes off 5 seconds after
it is lighted up.
Other load(s) off.
Power board software version No. in full: (the latest software version No. will be
taken into account at testing)
Wine compartment/freezer power board
：
P018U903
Fridge power board: P018BU001
2. If there is no power board software version No. displayed, it means there is
problem with the software version and the power board is disqualified.
3
．
During the process of Selfcheck, the effectiveness of the door Input signal can be
tested:
When the fridge SW-FR door switch K1 is set at ON, the fridge door lamp turns on.
When K1 is set at OFF, the fridge door lamp turns off.
When the wine compartment SW-CL door switch K10 is set at ON, the wine
compartment door lamp turns on. When K10 is set at OFF, the wine compartment
door lamp turns off.
When the freezer SW-FZ door switch K9 is set at ON, the beeper alarm starts about
90 seconds later. When you set K9 at OFF at this moment, the alarm stops.
4.Press SETTING and
▽
buttons on the display board simultaneously and hold on for
