Electrolux EPWC1MEUKG, Instruction Manual, Page: 7 / 16

7
IMPORTANT
Make sure the appliance is unplugged.
IMPORTANT
Be careful when handling the lamp as the
tube is made of glass and may break.
IMPORTANT
the product by following the instructions
in Chapter 6, Cleaning and Maintenance.
Figure 7
Figure 8
Figure 9
Figure 10
Figure 11
UV Lamp Installation
1. Unplug the product from the power outlet
and remove the lamp from the EPS housing.
2. Position the lamp carefully over the housing
without releasing it (Figure 8).
3. Connect the UV lamp to its power cable con-
nector (Figure 9).
4. Snap the connector into the housing and at-
tach the cable to the clip (Figure 10).
5. Plug the product into the power outlet and
press the “RESET UV LAMP" button as
shown in Figure 11.
RESET
UV LAMP