Electrolux EPS09V57HW, User Manual

Page: 11 / 82

11 ENGLISH
• Before changing the filter or cleaning,
turn off the unit and disconnect its
power supply.
• When removing filter, do not touch
metal parts in the unit. The sharp
metal edges can cut you.
• Do not use water to clean the inside
of the indoor unit. This can destroy
insulation and cause electrical shock.
• Do not expose filter to direct sunlight
when drying. This can shrink the filter.
Air Filter Reminders (Optional)
Air Filter Cleaning Reminder
After 240 hours of use, the display
window on the indoor unit will flash “CL.”
This is a reminder to clean your filter.
After 15 seconds, the unit will revert to its
previous display
To reset the reminder, press the
LED
button on your remote control 4 times, or
press the
MANUAL CONTROL
button
3 times. If you don’t reset the reminder,
the “CL” indicator will flash again when
you restart the unit.
Air Filter Replacement Reminder
After 2,880 hours of use, the display
window on the indoor unit will flash “nF.”
This is a reminder to replace your filter.
After 15 seconds, the unit will revert to its
previous display.
To reset the reminder, press the
LED
button on your remote control 4 times, or
press the MANUAL CONTROL button
3 times. If you don’t reset the reminder,
the “nF” indicator will flash again when
you restart the unit.
CAUTION!
• Any maintenance and cleaning of
outdoor unit should be performed
by an authorized dealer or licensed
service provider.
• Any unit repairs should be performed
by authorized dealer or licensed
service provider.
Maintenance – Long Periods of
Non-Use
If you plan not to use your air conditioner
for an extended period of time, do the
following:
Turn off the unit and
disconnect the power
Remove batteries
from remote control
Turn on FAN function until
unit dries out completely
Clean all filters
Maintenance – Pre-Season
Inspection
After long periods of non-use, or before
periods of frequent use, do the following:
Check for damaged wires
Clean all files
Make sure nothing is blocking all air inlets and outlets
Replace batteries Check for leaks