![Electrolux EON3010 User Manual Download Page 21](http://html.mh-extra.com/html/electrolux/eon3010/eon3010_user-manual_2383440021.webp)
10.
INSTALLATION
WARNING!
Refer to the Safety chapters.
10.1
Building Under
WARNING!
Only a qualified and competent
person must do the installation of
the appliance. If you do not con-
tact a qualified or competent per-
son, the guarantee becomes inva-
lid if there is damage.
• Before you install the appliance, fit it
with the applicable hob from the table.
Type
Maximum power
EHA6040
6500 W
EHA6046
7600 W
10.2
Electrical connection with
the hob
The hob connection socket is at the top
of the oven cabinet. The hob has connec-
tion leads for the cooking zones and the
ground cable. The leads have plug-in
connectors. To connect the hob to the
oven, plug the connectors into the correct
oven sockets. The design of the plugs
and sockets prevents incorrect connec-
tions.
573
594
5
589
558
548
20
min. 550
min. 560
600
20
A
B
10.3
Electrical installation
WARNING!
Only a qualified person must do
the electrical installation.
The manufacturer is not responsi-
ble if you do not follow safety pre-
cautions from the chapter "Safety
information".
This appliance is supplied without a main
plug or a main cable.
10.4
Cable
Cable types applicable for installation or
replacement: H07 RN-F, H05 RN-F, H05
RRF, H05 VV-F, H05 V2V2-F (T90), H05
BB-F.
For the section of the cable refer to the
total power on the rating plate.
10.5
Connecting the terminal
board
The appliance has a six-pole terminal
board. The jumpers (bridges) are set for
operation on a 400 V three-phase with a
neutral wire.
ENGLISH
21