Electrolux EOC67000, User Manual, Page: 72 / 84

72 electrolux what to do if …
What to do if
…
Problem Possible cause Remedy
The oven does not heat
up The oven is not switched on Switch the oven on
The clock is not set Set the current time on the
clock
The required settings have
not been set Check the settings
The oven’s automatic cut-
out has been triggered. See Automatic cut-out
The fuse in the house’s elec-
trical wiring (fuse box) has
been tripped Check fuse. If the fuses trip
repeatedly, please call an au-
thorised electrician
The oven lighting is not
operating The oven bulb is faulty Change the oven bulb
The pyrolysis function is
not working (“C1“ is
shown in the time display) Side rails/oven shelf runners
have not been removed Remove side rails/oven shelf
runners
The pyrolysis function is
not working (“C3“ is
shown in the time display) Door not properly closed or
door lock defective Close door properly
The oven does not heat
up. Time is lit Demo mode is on Keep Selection button
pressed for 2 seconds, then
within 2 seconds press and
hold buttons Selection
and for 2 seconds
F11 appears in the clock
display The meat probe has short
circuited or the plug of the
meat probe is not firmly in
position in the socket Insert the plug of the meat
probe as far as it will go into
the socket on the side wall of
the oven
F2 appears in the clock
display Door not properly closed or
door lock defective Close door properly;
Turn the appliance off and on
again via the house fuse or
the safety switch in the fuse
box;
If displayed again, please
contact the Customer Care
Department