CARE AND CLEANING
WARNING!
Refer to "Safety information" chap-
ter.
Notes on cleaning:
• Clean the front of the appliance with a
soft cloth with warm water and a clean-
ing agent.
• To clean metal surfaces, use a usual
cleaning agent.
• Clean the appliance interior after each
use. Then you can remove dirt more
easily and it does not burn on.
• Clean stubborn dirt with a special oven
cleaner.
• Clean all accessories after each use and
let them dry. Use a soft cloth with warm
water and a cleaning agent.
• If you have nonstick accessories, do not
clean them using aggressive agents,
sharp-edged objects or a dishwasher. It
can cause damage to the nonstick coat-
ing.
PYROLYTIC CLEANING
Remove all accessories and re-
movable shelf supports.
Do not start the pyrolytic
cleaning if:
• You did not remove the shelf
supports or telescopic shelf run-
ners (if supplied). In some mod-
els, the display shows “C1”
when this error occurs.
• You did not fully close the oven
door. In some models, the dis-
play shows “C3” when this error
occurs.
1.
Remove the worst dirt manually.
2.
Set the Pyrolytic cleaning function. Re-
fer to "Oven functions".
3.
flashes.
After 2 seconds the procedure starts.
The procedure is 1:30 h long.
You can use the End function to
delay the start of the cleaning pro-
cedure.
When the oven is at its set temper-
ature, the door locks. The display
shows the symbol
and the bars
of the heat indicator until the door
unlocks.
During the pyrolytic cleaning the
lamp is off.
Cleaning reminder
To remind you that the pyrolytic cleaning is
necessary,
PYR
flashes in the display for
10 seconds after each activation and deac-
tivation of the appliance.
The cleaning reminder goes off
the display:
• After the end of the Pyrolytic
cleaning function.
• If you press “
” and “
” at
the same time.
LAMP
WARNING!
There is a risk of electrical shock.
The lamp and the lamp glass cover
can be hot.
Before you change the lamp:
• Deactivate the appliance.
• Remove the fuses from the fuse box or
deactivate the circuit breaker.
CAUTION!
Put a cloth on the bottom of the in-
terior of the appliance. It prevents
damage to the lamp glass cover
and the cavity.
Always use the same lamp type.
Replacing the lamp at the cavity
ceiling:
1.
Turn the lamp glass cover counter-
clockwise to remove it.
2.
Clean the glass cover.
3.
Replace the lamp with a suitable 300
°C heat-resistant lamp.
4.
Install the glass cover.
26 www.electrolux.com
