
90°
7.
First lift carefully and then remove the
glass panel.
1
2
8.
Clean the glass panel with water and
soap. Dry the glass panel carefully.
When the cleaning is completed, install the
glass panel and the oven door. Do the
above steps in the opposite sequence.
The screen-printing zone must face the
inner side of the door. Make sure that after
the installation the surface of the glass
panel frame on the screen-printing zones
is not rough when you touch it.
Make sure that you install the internal
glass panel in the seats correctly.
9.6
Replacing the lamp
Put a cloth on the bottom of the interior of
the appliance. It prevents damage to the
lamp glass cover and the cavity.
WARNING!
Danger of electrocution!
Disconnect the fuse before
you replace the lamp.
The lamp and the lamp glass
cover can be hot.
CAUTION!
Always hold the halogen lamp
with a cloth to prevent grease
residue from burning on the
lamp.
1.
Deactivate the appliance.
2.
Remove the fuses from the fuse box
or deactivate the circuit breaker.
The back lamp
1.
Turn the lamp glass cover
counterclockwise to remove it.
2.
Clean the glass cover.
3.
Replace the lamp with a suitable 300
°C heat-resistant lamp.
4.
Install the glass cover.
10.
TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
www.electrolux.com
20
Summary of Contents for EOB3400BOR
Page 1: ...EOB3400BOR EN OVEN USER MANUAL 2 IT FORNO ISTRUZIONI PER L USO 25 ...
Page 49: ...ITALIANO 49 ...
Page 50: ...www electrolux com 50 ...
Page 51: ...ITALIANO 51 ...