14
COOKING ZONES
The zones are operated using the knobs on the
control panel .
The control knob is numbered from 1 to 12
0 - OFF
1 - Lowest heat
12 - Maximum heat
Switching on the single ring cooking zone
To switch on a cooking zone, turn the relevant
control knob to the required heat setting.
Switching on the double ring cooking
zone
Turn the relevant control knob to right to the
maximum position. The small ring cooking zone
switches on.
Turn the knob further till the position "Off" then
turn it back to the the maximum position (12).
The big ring cooking zone will switch on, too.
Switching on the casserole zone
Turn the relevant control knob to right to the
maximum position. The ring cooking zone
switches on.
Turn the knob further till the position "Off" then
turn it back to the the maximum position (12).
The oval area will switch on.
Residual Heat Indicator
This warning lamp lights up when the surface of
the cooking zone reaches a temperature which
could cause burning. This lamp also remains lit
after the heated-up area has been switched off
as long as the residual heat of the surface still
could cause burns. The lamp will only go out
when there is no more danger (temperature
below 50°C). The lamp with four lights indicates
the corresponding cooking zones. This way it is
possible to see at once which zone still hot.
