6
www.electrolux.com
CNT
CNS
KR
ID
TH
VN
EN
10
The motor head and main body should only be cleaned with a soft damp cloth
, then dried with a
cloth.
Note:
Do not use abrasive cleansers or scouring pads to clean the surfaces of your appliance.
OTHER FUNCTIONS
11
Attachment hub:
The appliance comes with two built in multi-purpose attachment hubs, one in front
(A) and one at the back (B). The front attachment hub is designed for the meat grinder and salad
maker accessories. The rear attachment hub is designed for blender jar accessory.
It is possible to purchase meat grinder, salad maker and blender jar as additional accessories,
please contact your local sales office for more details. Read and carefully follow the instructions that
comes with each attachment for correct and safe use.
HOW TO USE THE MEAT GRINDER*
12
Insert the grind screw (B) into the grinder housing (A).
Place the knife (C) over the square shaft at
the end of the grind screw. Place the grinding plate (D) (medium or coarse) over the knife. Tighten the
ring (E) by hand until the meat grinder is secured.
Note:
Do not over tighten the ring.
13
Push the front attachment hub release lever to the right and remove the front attachment hub
cover.
Continue pushing the lever while fitting the power shaft of the meat grinder in the front
attachment hub socket. Once the meat grinder is securely attached, release the front attachment hub
lever.
Note:
The lever will click into position once the attachment is securely attached.
14
Place the food tray over the grinder housing.
Cut raw meat into small pieces and place it on the
food tray. Plug in the appliance and turn the speed selector to desired speed (recommended speed:
3-4). Feed the meat into the feed chute by using the pusher.
Caution:
Do not put your fingers or other utensils in the feed chute.
Note:
Meat should not contain bones, muscles or skin.
After using the attachment,
push the front attachment hub release lever to the right, remove the
attachment from the front attachment hub socket, then fit the front attachment hub cover into the
front attachment hub socket.
Caution:
Switch off and unplug the appliance before removing the accessories.
How to clean:
Loosen the ring to remove the grinding plate, knife and grind screw from the grind
housing. All parts of the meat grinder should only be washed by hand in warm soapy water.
HOW TO USE THE SALAD MAKER*
15
Choose a cylindrical slicer (medium or course) or a shredder knife.
Insert the attachment by turning
it clockwise into the salad maker housing. Make sure the attachment is fully inserted.
Caution:
The blades and inserts are very sharp!
16
Push the front attachment hub release lever to the right and remove the front attachment hub
cover.
Continue pushing the lever while fitting the power shaft of the salad maker in the front
attachment hub socket. Once the salad maker is securely attached, release the front attachment hub
lever.
Note:
The lever will click into position once the attachment is securely attached.
Place a container under the salad maker.
Caution:
Switch off and unplug the appliance before attaching the accessories.
17
Feed the food into the feed chute by using the pusher.
Cut the food into small pieces. Plug in and
switch on the appliance and turn the speed selector to desired speed (recommended speed: 4).
Feed the food into the feed chute by using the pusher.
Caution:
Do not put your fingers or other utensils in the feed chute.
* Certain models only