30
If the appliance is not working correctly, please carry out the following checks, before contacting your local Service
Centre.
IMPORTANT:
If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation,
a charge will be made even if the appliance is under guarantee.
Something not working
SYMPTOM
!
!!
!
!
There is no spark when lighting the gas.
!
!!
!
!
The gas ring burns unevenly.
!
!!
!
!
The oven does not come on.
!
!!
!
!
The oven light does not come on.
!
!!
!
!
It takes too long to finish the dishes, or they are
cooked too fast.
!
!!
!
!
Steam and condensation settle on the food and the
oven cavity.
!
!!
!
!
The oven fan is noisy.
!
!!
!
!
The display shows "12.00".
#
Error code (letter "F" followed by digits) appears on
the control panel.
SOLUTION
"
"
"
"
"
Check that the unit is plugged in and the electrical
supply is switched on
"
"
"
"
"
Check the mains fuse has not blown
"
"
"
"
"
Check the burner cap and crown have been
replaced correctly, e.g. after cleaning.
"
"
"
"
"
Check the main jet is not blocked and the burner
crown is clear of food particles.
"
"
"
"
"
Check the burner cap and crown have been
replaced correctly, e.g. after cleaning.
"
"
"
"
"
Check that a cooking function has been selected.
"
"
"
"
"
Check that the oven door is completely closed.
"
"
"
"
"
Check that the time of day has ben set (see
chapter "How to set the time of day").
"
"
"
"
"
Check that the socket switch or the switch from the
mains supply to the cooker are ON.
"
"
"
"
"
Select a function with the oven function control
knob.
"
"
"
"
"
Check the light bulb, and replace it if necessary
(see "Oven Lamp replacement").
"
"
"
"
"
The temperature may need adjusting.
"
"
"
"
"
Refer to the contents of this booklet, especially to
the chapter “Using the Oven”.
"
"
"
"
"
Leave dishes inside the oven no longer than 15-20
minutes after the cooking is completed.
"
"
"
"
"
Check that shelves and bakeware are not vibrating
in contact with the oven back panel.
"
"
"
"
"
Set the time of day (see chapter "How to set the
time of day").
"
"
"
"
"
Take note of the error code and contact an authorised
Service Centre.
