Electrolux EKK925A0, User Manual

Page: 23 / 32

13.1 What to do if...
Problem Possible cause Remedy
You cannot activate the
appliance.
The appliance is not con‐
nected to an electrical sup‐
ply or it is connected incor‐
rectly.
Check if the appliance is
correctly connected to the
electrical supply.
You cannot activate or op‐
erate the hob.
The oven does not heat
up.
The fuse is released. Make sure that the fuse is
the cause of the malfunc‐
tion. If the fuse releases
again and again, contact a
qualified electrician.
The oven / hob display
shows an error code that is
not in this table.
There is an electrical fault. Deactivate the appliance
with the house fuse or the
safety switch in the fuse
box and activate it again.
If the display shows the er‐
ror code again, contact the
Customer Care Depart‐
ment.
There is no spark when
you try to activate the
spark generator.
The hob is not connected
to an electrical supply or it
is connected incorrectly.
Check if the hob is correct‐
ly connected to the electri‐
cal supply. Refer to the
connection diagram.
There is no spark when
you try to activate the
spark generator.
The fuse is released. Make sure that the fuse is
the cause of the malfunc‐
tion. If the fuse releases
again and again, contact a
qualified electrician.
There is no spark when
you try to activate the
spark generator.
Burner cap and crown are
placed incorrectly.
Place the burner cap and
crown correctly.
The flame extinguishes im‐
mediately after ignition.
Thermocouple is not heat‐
ed up sufficiently.
After lightning the flame,
keep the spark generator
activated for equal or less
than 10 seconds
The flame ring is uneven. Burner crown is blocked
with food residues.
Make sure that the injector
is not blocked and the
burner crown is clean.
The burners do not work. There is no gas supply. Check the gas connection.
The flame colour is orange
or yellow.
The flame can look orange
or yellow in some areas of
the burner. This is normal.
The oven does not heat
up.
The oven is deactivated. Activate the oven.
ENGLISH 23