Electrolux EKG603202, User Manual, Page: 8 / 28

7
5
6
8
3
4
2
1
3
7
5
6
8
1
2
4
1
Burner cap
2
Burner crown
3
Ignition candle
4
Thermocouple
5
Slots
6
Burner body
7
Location peg
8
Hole
REPLACING BURNER PARTS
1. Carefully put the burner crown on the
burner body. Do not use force.
a)
Make sure that the hole in the
crown is above the ignition candle.
b) Make sure that the location pegs
are in the slots in the burner body.
c) Let the crown fall freely onto the
body.
d) Make sure that you can move the
crown a small distance from side to
side.
2. Put the burner cap centrally on top of
the crown (enamel side up). Move the
cap from side to side and front to back
to make sure that it is correctly instal-
led.
3. Try to light the burner. If the burner
does not ignite, adjust the crown and
cap again.
Warning! Do not keep control knob
pressed for more than 15 seconds.
If the burner does not light after 15
seconds, release the control knob, turn
it into off position and wait for at least 1
minute before trying to light the burner
again.
If the burner accidentally goes out, turn
the control knob to the off position and
try to light the burner again after mini-
mum 1 minute.
The spark generator can start automat-
ically when you switch on the mains,
after installation or a power cut. It is
normal.
TURNING THE BURNER OFF
To put the flame out, turn the knob to the
symbol
.
Warning! Always turn the flame down
or switch it off before you remove the
pans from the burner.
LID SAFETY DEVICE
Lid has safety device, which cut off gas
supply for hob. It works only when lid is
closed.
Warning! Always use the control knob
to switch off a burner. Do not use the
lid as a cut-off device.
8 electrolux