Electrolux EKG501102 User Manual Download Page 3

electrolux  

 

 

When in use a gas cooker will produce 
heat and moisture in the room in which it 
has been installed. Ensure there is a 
continuous air supply, by keeping air 
vents in good condition or installing a 
cooker hood with a venting hose. 

 

When using the cooker for a long period 
time, opening a window or increasing the 
extractor speed should improve the 
ventilation. 

 

Do not use this cooker if it is in contact 
with water. Do not operate the cooker 
with wet hands. 

 

The grill pan will become hot during use, 
always use oven gloves when removing 
or replacing a hot grill pan. 

 

Ensure the control knobs are in the 
‘OFF’ position when not in use. 

 

When using other electrical appliances, 
ensure the cable does not come into 
contact with the hot surfaces of the 
cooker. 

 

Unstable or misshapen pans should not 
be used on the hob burners as unstable 
pans can cause an accident by tipping 
or spillage. 

 

Never leave the cooker unattended 
when cooking with oil and fat. 

 

Never pull the appliance by the oven 
handle or by the hob. 

 

This cooker should be kept clean at all 
times. A build-up of fat or foodstuff could 
result in a fire. 

 

Never use steam or high-pressure 
appliances for cleaning the oven. 

 

Never use plastic dishes in the oven or 
on the hob burners. Never line any part 
of the oven with aluminium foil. 

 

Always ensure that the oven vent, which 
is located at the centre back of the hob, 
is left unobstructed to ensure ventilation 
of the oven cavity. 

 

Perishable food, plastic items and 
aerosols may be affected by heat and 
should not be stored above the cooker. 

 

The appliance is fitted with a lid: this is 
designed as a dust cover when closed, 

 

and as a splash back when open. Do 
not use for any other purpose. 

 

Always remove any spillage from the 
surface of the lid before opening, and 
the appliance should be allowed to cool 
before closing the lid. 

 

After using the cooker, the lid MUST 
NOT be closed until the hob and oven 
are completely cold. 

Service 

 

This cooker should only be repaired or 
serviced by an authorised Service 
Engineer and only genuine approved 
spare parts should be used. 

 

We decline our responsibility for 
possible damages resulting from bad 
use and non-observing of safety rules in 
force. Do observe strictly the cleaning 
and maintenance instructions. 

 

Environmental Information 

 

After installation, please dispose of the 
packaging with due regard to safety and 
the environment. 

 

When disposing of an old appliance, 
make it unusable, by cutting off the 
cable. 

In case of intervention on your appliance ask 
the Manufacturer after sales service only the 
spare parts certifies you. 

The symbol 

 on the product or on its 

packaging indicates that this product may 
not be treated as household waste. Instead 
it shall be handed over to the applicable 
collection point for the recycling of electrical 
and electronic equipment. By ensuring this 
product is disposed of correctly, you will 
help prevent potential negative 
consequences for the environment and 
human health, which could otherwise be 
caused by inappropriate waste handling of 
this product. 
For more detailed information about 
recycling of this product, please contact 
your local city office, your household waste 
disposal service or the shop where you 
purchased the product. 

Summary of Contents for EKG501102

























Reviews: