10
Manual ignition (in case of lack of electrical
supply)
1. Open the oven door.
2. Hold a flame near the hole in the bottom of the oven
cavity as shown in Fig. 8.
3. At the same time press the gas oven control knob
and turn it anti-clockwise until the maximum
temperature ("
240
") is reached.
The oven burner will automatically ignite. It is possible
to check the flame through the holes in the bottom of
the oven.
4. When the oven burner is lit, keep the gas oven control
knob for approximately
10-15 seconds
.
5. Release the control knob and then gently close the
oven door. To adjust the temperature, turn the knob
to the required setting after a few minutes.
If the oven burner accidentally goes out or
does not light, turn the oven knob to "
"
" and
wait at least one minute before trying to light
the burner again.
!
hole for manual ignition
Fig. 8
