electrolux
9
To light a burner:
1. push the relevant control knob
in completely and turn it
anticlockwise to the maximum
position (
).
2. then, check the flame is regular
and adjust it as required.
If the burner does not ignite, turn the
control knob to zero, and try again.
If after a few attempts the burner
does not ignite, check that the burner
cap and crown are correctly positioned
(see figure 2 - letter A and B).
To interrupt the supply of gas, turn
the knob in a clockwise direction to the
position " ".
The Gas Burner Controls
!
Control knobs on the front
panel
The knobs for using the gas hob of
the cooker are found on the control
panel. The regulation knobs could be
turned in anti-clockwise direction until
the small flame symbol, and vice-versa
for the larger symbol.
No gas supply
Maximum gas supply
Minimum gas supply
A
A
A
A
A
- Burner cap
B
B
B
B
B
- Burner crown
C
C
C
C
C
- Ignition candle
Fig. 2
Fig. 1
Summary of Contents for EKG 6013
Page 2: ...2 electrolux ...
Page 39: ...electrolux 39 ...
