Removing and cleaning the door glasses
1. Hold the door trim (B) on the top edge of
the door at the two sides and push in-
wards to release the clip seal.
B
2. Pull the door trim to the front to remove
it.
3. Hold the door glass panels on their top
edge one by one and pull them upwards
out of the guide
4. Clean the door glass panels.
To install panels follow the procedure in
reverse. Insert the smaller panel first, then
the larger.
Stainless steel or aluminium appli-
ances:
Clean the oven door with a wet sponge
only. Dry it with a soft cloth.
Do not use steel wool, acids or abrasive
materials as they can damage the oven
surface. Clean the oven control panel
with the same precautions
Oven lamp
Warning!
There is a danger of electrical
shock!
Before you change the oven lamp:
• Switch off the oven.
• Remove the fuses in the fuse box or switch
off the circuit breaker.
Put a cloth on the bottom of the oven for
protection of the oven light and glass
cover.
Replacing the oven light bulb/cleaning the
glass cover
1. Turn the glass cover anti-clockwise to re-
move it.
2. Clean the glass cover.
3. Replace the oven light bulb with applica-
ble 300°C heat-resistant oven light bulb.
4. Install the glass cover.
Removing the drawer
The drawer underneath the oven can be re-
moved for easier cleaning.
Removing the drawer
1.
Pull the drawer out as far as possible.
2. Lift the drawer slightly, so that can be lif-
ted upwards at an angle of the drawer
guides.
Inserting the drawer
1. Set the drawer on the drawer's support
rails. Make sure that drawer's middle
guide engages into the middle rail.
2. Lower the drawer to the horizontal and
push it in.
1
2
electrolux
19