Electrolux EKC 60353, Instruction Booklet

Page: 26 / 33

26 electrolux
The Oven Door and its gasket
Before cleaning the oven door, we
recommend you to remove it from the
oven.
Proceed as follows:
1. open the oven door completely;
2. find the hinges linking the door to the
oven (see picture 1);
3. unlock and turn the small levers
located on the two hinges (see picture
2);
4. handle the door by its left- and right-
hand sides, then slowly turn it towards
the oven until it is half-closed (see
picture 3);
5. gently pull the oven door off its site
(see picture 3);
6. place it on a steady plan;
Clean the oven door glass with warm
soapy water and a softh cloth only. Never
use harsh abrasives.
Once the cleaning is carried out, refit
the oven door, following the procedure in
reverse.
DO NOT clean the oven door while
the glass panels are warm. If this
precaution is not observed the glass
panel may shatter.
If the door glass panel becomes
chipped or has deep scratches, the
glass will be weakened and must be
replaced to prevent the possibility of
the panel shattering. Contact your
local Service Centre who will be
pleased to advise further.
Models in stainless steel or
aluminium:
We recommend to clean the oven
door using only a wet sponge and dry it
up after cleaning with a soft cloth.
Never use steel wool, acids or abrasi-
ve products as they can damage the oven
surface.
Clean the oven control panel following
the same precautions.
The correct operation of the oven is
ensured by a gasket placed round the
edge of the oven cavity.
•
Periodically check the condition of
this gasket. If necessary, clean it
without using abrasive cleaning
products.
•
If the gasket shows to be damaged ,
call you local Service Centre. Do not
use the oven until it has been repaired.
!
1
2
3