Electrolux EKC 60353, Instruction Booklet

Page: 14 / 33

14 electrolux
5
1 2 3
6
7
8
The oven will only work if the time
of day has been set.
However, the oven can also be
operated without any programme.
Setting the time of day
When the power supply is switched
on, or after a power failure, the “Time of
day” pilot lamp
will flash on the
display.
To set the correct time of day:
1.
Press button or .
2. After the setting is carried out, wait
for 5 seconds: the “Time of day” pilot
lamp will go out and the display will
show the set time. The appliance is
ready for use.
To reset the correct time of day:
1. Press button repeatedly to select
the “Time of day” function. The rel-
evant pilot lamp will start flashing.
Then proceed as described above.
The time of day can only be reset if
no automatic function (cook duration
or end of cooking ) has been
set .
Electronic Programmer
4
1. Push button for selecting a function
2. Decreasing control button
“ ”
3. Increasing control button
“ ”
4. Display
5. “Cooking Duration” pilot lamp
6. “End of cooking” pilot lamp
7. “Minute minder” pilot lamp
8. “Time of day” pilot lamp
In the event of a power failure, all
the settings (time of day,
programme setting or programme
in operation) will be cancelled.
When the power is restored, the
numbers in the display will flash,
and the clock/timer has to be
reset.