Electrolux EK 5147, Instruction Book, Page: 7 / 28

The safety equipment
7
Setting the clock
Once the cooker is connected to the power supply,
some symbols will start flashing until you have set the
time on the clock.
HOW TO SET THE CLOCK
:
1
The symbol
A
and 0:00 will be flashing in the
information window.
2
Press the and , buttons at the same time,
release the button first, then the button,
and set the right time using or . The time
is set in minutes. The
A
symbol in the window
disappears.
Heat the hotplates
When supplied, the hotplates have been pretreated
with an anti-corrosion product which will provide bet-
ter protection if the hotplates are heated without pans
the first time.
Heat one hotplate at a time on full power for no
more than five minutes. The hotplates will get very
hot, so be extra mindful of the safety of anyone near
the cooker during this procedure. Some smoke and
fumes are to be expected as the remaining solvent
evaporates. Finish heating the hotplates before you
first heat the oven.
Heat the oven empty
Children should be supervised!
The cooker will get very hot.
Before you use the oven for the first time, you need to
heat it empty. Follow these instructions:
1
Select (top/bottom heat) and maximum tem-
perature. The oven door should be shut.
2
Ventilate the room. Switch off the oven once the
“new” smell and fumes have ceased.
3
Use hot water and washing-up liquid to wipe the
oven, side racks and the inside of the door. Then
wipe all of these parts dry.
A
max. 5 min.
max.°C