Electrolux EIFH/C-2 EEC, User Manual

Page: 6 / 108

6 http://www.home-comfort.com
1. Mode “1”, on (air heating and, depending
on the position of the thermostat,
ventilation without heating)
2. Mode “0” (off).
3. Thermostat.
Turning on the fan heater and operating
modes
To turn on the fan heater, connect the mains
plug to the mains socket, set the switch
button to position “1” (mode “1”). If the
ambient temperature is higher than the one
set by the thermostat, the fan heater works
in ventilation mode without heating. If the
ambient temperature is lower than that set by
the thermostat, the fan heater operates in the
ventilation mode with heating. The thermostat
knob sets the required air temperature in
the room. The thermostat maintains the set
temperature by automatically turning off and
on the electric heater (the approximate range
• The openings in the housing at the air inlet
and outlet are blocked by foreign objects
or heavily soiled;
• Uncorrected fan heater;
• The heat output of the fan heater is much
higher than the heat loss of the room in
which it operates.
Specifications
Model EIFH/C-2 EEC EIFH/C-3 EEC
Supply voltage, V ~ Hz 220–240 ~ 50 220–240 ~ 50
Maximum power consumption, kW * 2.2 3
Productivity, m
3
/h 100 150
Rated current, A 9.6 13.6
Protection degree IP 21 IP 21
Electrical protection class I class I class
Heating area, m
2
* up to 25 up to 35
Appliance size
(W×H×D)
, mm 150×180×170 175×205×180
Packing size
(W×H×D)
, mm 180×150×160 195×175×185
Net weight, kg 1.1 1.6
Gross weight, kg 1.2 1.7
* Indicated is a guideline value and may differ depending on actual conditions of use.
Appliance operation
When using the device, observe the safety
requirements outlined in this manual.
Before turning on the fan heater, the switch
key must be in position “2”, and the thermostat
knob must be turned to the extreme
counterclockwise position.
Fan heater control panel