Instructions d’installation
Vos armoires peuvent être dotées de garnitures
décoratives qui entravent l’installation du micro-ondes.
Enlevez l’élément décoratif pour installer convenablement
le four à micro-ondes et pour vous assurer qu’il est de
niveau.
LE FOUR À MICRO-ONDES DOIT ÊTRE DE NIVEAU.
Utilisez un niveau pour vous assurer que le fond de
l’armoire est de niveau.
Si les armoires sont dotées uniquement d’un rebord avant,
sans rebord sur les côtés ou à l’arrière, installez la plaque de
montage plus bas, à la même distance que le rebord avant
de l’armoire. Ainsi, le four sera de niveau.
Mesurez la hauteur intérieure du rebord avant de
l’armoire.
Tracez une ligne horizontale sous le fond de l’armoire,
sur le mur arrière à une distance équivalente à la
longueur intérieure du rebord avant de l’armoire.
Pour l’installation sous une armoire dotée d’un rebord
avant uniquement, alignez les languettes de montage
sur cette ligne horizontale, sans qu’elles touchent le
fond de l’armoire, tel que décrit à l’étape D.
3
2
1
ÉTABLISSEMENT DE L’EMPLACEMENT DE LA PLAQUE MURALE SOUS
VOTRE ARMOIRE
C.
Emplacement de la plaque - sous une armoire
à fond plat
Emplacement de la plaque - sous une
Emplacement de la plaque - sous une armoire
dotée d’un rebord
Au moins 30 po
C
3/8" TO EDGE
%#76+10Ä+(
':*#756#
ਸ਼+52
15+6+10'&1
765+&'
4'%1//
'0&'&&+/
'05+10)4
'#5'Ä.#&'
0#+49+..
&+5
%*#4)'+06
1*175'56
47%674'
/+0+/7/9
+&6*4'37+4'&
4'#49#..6'/2.#6'
NOTE: IT
IS VERY IM
PORTANT
TO
READ AND
FOLLOW
THE DIRE
CTIONS
IN THE INS
TALLATIO
N INSTRU
CTIONS
BEFORE
PROCEED
ING WITH
THIS
REAR WA
LL TEMPLA
TE.
This Rea
r Wall Temp
late serves
to position th
e bottom
mounting pla
te and to loc
ate the horiz
ontal exhaus
t
outlet.
1. Use a leve
l to check th
at the temp
late is positio
ned
accurately.
2. Locate and
mark at leas
t one stud on
the left or
right side of
the centerlin
e.
016'
It is importa
nt to use at le
ast one wo
od
screw moun
ted firmly in
a stud to sup
port the we
ight
of the micro
wave. Mark
two additiona
l, evenly spa
ced
locations for
the supplied
toggle bolts.
3. Drill holes
in the marke
d locations.
Where there
is
a stud, drill a
3/16" hole fo
r wood screw
s. For holes
that do not lin
e up with a
stud, drill 5/8
" holes for
toggle bolts.
016'
DO NOT IN
STALL THE
MOUNTING
PLATE
AT THIS TIM
E.
4. Remove
the template
from the rea
r wall.
5. Review th
e Installation
Instruction b
ook for your
installation s
ituation.
Locate and m
ark holes to
align with
holes in the
mounting
plate.
IMPORTAN
T:
LOCATE AT
LEAST ON
E STUD
ON EITHE
R SIDE OF
THE CENT
ERLINE.
MARK THE
LOCATION
FOR 2 AD
DITIONAL,
EVENLY
SPACED
TOGGLE
BOLTS IN
THE MOU
NTING PLA
TE
AREA.
Locate and
mark holes
to align with
holes in the
mounting
plate.
IMPORTANT
:
LOCATE AT
LEAST ON
E STUD O
N EITHER
SIDE OF
THE CENT
ERLINE.
MARK THE
LOCATION
FOR 2 AD
DITIONAL,
EVENLY
SPACED
TOGG
LE BOLTS
IN THE MO
UNTING P
LATE
AREA.
Trim the re
ar wall temp
late along
the dotted
line.
Trim the re
ar wall tem
plate along
the dotted
line.
%
#
$
%
&
(%761
76(14*14+<106#.
1765+&'':
*#756
%76*1.'6
*417)*4'
#49#..(1
4':*#756#
ਸ਼
12"
4"
Darle vuelta
a la hoja pa
ra consulta
r la
versión en
Español.
17-1/
ą
2
Tracez une ligne verticale sur
le mur au centre de l'espace
de 30 po de large.
Tape gabarit pour mur arrière
sur le mur correspondant à la
ligne médiane et en touchant
le bas de l'armoire.
C
3/8" TO EDGE
%#76+10Ä+(
':*#756#
ਸ਼+52
15+6+10'&1
765+&'
4'%1//
'0&'&&+/
'05+10)
4'#5'Ä.#&'
0#+49+..
&
+5%*#4)'+0
61*175'5
647%674'
/+0+/7
/9+&6*
4'37+4'&
4'#49#..6'/2.#6'
NOTE: IT
IS VERY IMP
ORTANT T
O
READ AND
FOLLOW
THE DIRE
CTIONS
IN THE IN
STALLA
TION INST
RUCTION
S
BEFORE
PROCEED
ING WITH
THIS
REAR WA
LL TEMP
LATE.
This Rear Wa
ll Template
serves to po
sition the bo
ttom
mounting pla
te and to loca
te the horizo
ntal exhaust
outlet.
1. Use a leve
l to check th
at the templa
te is position
ed
accurately.
2. Locate an
d mark at lea
st one stud
on the left or
right side of
the centerlin
e.
016'
It is importan
t to use at le
ast one woo
d
screw moun
ted firmly in
a stud to sup
port the weig
ht
of the microw
ave. Mark tw
o additional,
evenly space
d
locations for
the supplied
toggle bolts.
3. Drill holes
in the marke
d locations.
Where there
is
a stud, drill a
3/16" hole fo
r wood scr
ews. For hole
s
that do not lin
e up with a
stud, drill 5/8
" holes for
toggle bolts.
016'
DO NOT IN
STALL THE
MOUNTING
PLATE
AT THIS TIM
E.
4. Remove
the template
from the rea
r wall.
5. Review the
Installation
Instruction b
ook for your
installation
situation.
Locate and
mark holes
to align with
holes in the
mounting p
late.
IMPORTAN
T:
LOCATE A
T LEAS
T ONE STUD
ON EITHE
R SIDE OF
THE CENT
ERLINE
.
MARK THE
LOCATION
FOR 2 AD
DITIONAL,
EVENLY
SPACED
TOGGLE
BOLTS IN
THE MOU
NTING PLAT
E
AREA.
Locate and
mark holes
to align with
holes in the
mounting p
late.
IMPORTANT
:
LOCATE A
T LEAST ON
E STUD O
N EITHER
SIDE OF
THE CENT
ERLINE.
MARK
THE LOCA
TION FOR
2 ADDITIO
NAL, EVENL
Y
SPACED
TOGGLE
BOLTS IN
THE MO
UNTING
PLATE
AREA.
Trim the re
ar wall temp
late alon
g the dotte
d line.
Trim the re
ar wall tem
plate alon
g the dotte
d line.
%
#
$
%
&
(%76176(14
*14+<10
6#.
1765+&
'':*#756
%76*1.'6*
417)*4'#
49#..(14
':*#756#
ਸ਼
12"
4"
Darle vuelta
a la hoja pa
ra consulta
r la
versión en
Español.
À 30 po de la surface de cuisson
Tracez une ligne verticale sur le mur au centre de l'espace de
30 po de large.
Tape gabarit pour mur arrière sur le mur correspondant à la
ligne médiane et en touchant le cadre bas de l'armoire.
C
3/8" TO EDGE
%#76+10Ä+(
':*#756#
ਸ਼
+5215+6+10
'&1765+&
'
4'%1//
'0&'&&+/
'05+10)4
'#5'Ä.#&'
0#+49+..
&+
5%*#4)'
+061*1
75'5647
%674'
/+0+/7
/9+&6*4'
37+4'&
4'#49#..
6'/2.#6'
NOTE: IT I
S VERY IM
PORTANT
TO
READ AN
D FOLLO
W THE DIR
ECTIONS
IN THE IN
STALLAT
ION INS
TRUCTIO
NS
BEFORE
PROCEE
DING WIT
H THIS
REAR W
ALL TEM
PLATE.
This Rear W
all Template
serves to po
sition the bo
ttom
mounting pla
te and to lo
cate the ho
rizontal exh
aust
outlet.
1. Use a lev
el to check
that the tem
plate is pos
itioned
accurately.
2. Locate a
nd mark at
least one stu
d on the left
or
right side of
the centerlin
e.
016'
It is importa
nt to use at
least one w
ood
screw moun
ted firmly in
a stud to su
pport the w
eight
of the micro
wave. Mark
two addition
al, evenly
spaced
locations fo
r the supp
lied toggle
bolts.
3. Drill hole
s in the ma
rked locatio
ns. Where
there is
a stud, drill
a 3/16" hole
for wood sc
rews. For h
oles
that do not
line up with
a stud, drill
5/8" holes fo
r
toggle bolts
.
016'
DO NOT IN
STALL THE
MOUNTING
PLATE
AT THIS TIM
E.
4. Remove
the templa
te from the
rear wall.
5. Review
the Installa
tion Instruct
ion book fo
r your
installation
situation.
Locate and
mark hole
s to align
with holes
in the
mounting
plate.
IMPORTA
NT:
LOCATE A
T LEAST
ONE STU
D ON EITHE
R SIDE O
F
THE CEN
TERLIN
E.
MARK TH
E LOCATIO
N FOR 2
ADDITION
AL, EVEN
LY
SPACED
TOGGLE
BOLTS IN
THE MOU
NTING PL
ATE
AREA.
Locate and
mark holes
to align w
ith holes in
the
mounting p
late.
IMPORTA
NT:
LOCATE
AT LEAST
ONE STU
D ON EITH
ER SIDE
OF
THE CENT
ERLINE.
MARK TH
E LOCATION
FOR 2 AD
DITIONAL
, EVENLY
SPACED T
OGGLE B
OLTS IN
THE MOU
NTING PLA
TE
AREA.
Trim the
rear wall
template
along the
dotted lin
e.
Trim the
rear wall te
mplate alo
ng the do
tted line.
%
#
$
%
&
(%7617
6(14*14
+<106#.
1765+
&'':*#756
%76*1.'
6*417)*
4'#49#.
.(14':*#
756#ą
4
12"
4"
Darle vuelt
a a la hoja
para consu
ltar la
versión en
Español.
3/8" TO EDGE
%#76+10
Ä+(':*#
756#&#
2614+5215
+6+10'&176
5+&'
4'%1//
'0&'&&+/'
05+10)4'
#5'Ä.#&'
0#+49+..
&+
5%*#4)'+06
1*175'5
647%674'
/+0+/7
/9+&6*4
'37+4'&
4'#49#..6'/2.#6'
NOTE: IT
IS VER
Y IMPOR
TANT T
O
READ AN
D FOLLO
W THE D
IRECTION
S
IN THE IN
STALLAT
ION INST
RUCTION
S
BEFOR
E PROCEED
ING WITH
THIS
REAR W
ALL TEMPL
ATE.
This Rear W
all Template s
erves to po
sition the bo
ttom
mounting p
late and to l
ocate the h
orizontal e
xhaust
outlet.
1. Use a lev
el to check
that the te
mplate is
positioned
accurately
.
2. Locate a
nd mark at le
ast one stu
d on the le
ft or
right side o
f the cente
rline.
016'
It is importa
nt to use a
t least one
wood
screw mo
unted firmly
in a stud to
support the
weight
of the mic
rowave. Ma
rk two additio
nal, evenly
spaced
locations fo
r the supp
lied toggle b
olts.
3. Drill hole
s in the ma
rked locatio
ns. Where th
ere is
a stud, d
rill a 3/16" h
ole for wood
screws. Fo
r holes
that do not lin
e up with a s
tud, drill 5/8
" holes fo
r
toggle bolts
.
016'
DO NOT INSTA
LL THE MO
UNTING PL
ATE
AT TH
IS TIME.
4. Remove
the temp
late from
the rear wa
ll.
5. Review t
he Installatio
n Instructio
n book fo
r your
installatio
n situation.
Locate a
nd mark
holes to al
ign with hol
es in the
mounting
plate.
IMPORTANT
:
LOCATE AT
LEAST
ONE ST
UD ON EI
THER SID
E OF
THE CEN
TERLIN
E.
MARK TH
E LOCATIO
N FOR 2
ADDITION
AL, EVEN
LY
SPAC
ED TOG
GLE BO
LTS IN TH
E MOUN
TING PLATE
AREA
.
Locate
and mark
holes to al
ign with hol
es in the
mounting pl
ate.
IMPO
RTANT:
LOCAT
E AT LEAS
T ONE ST
UD ON EI
THER SID
E OF
THE CEN
TERLIN
E.
MARK TH
E LOCATION
FOR 2 AD
DITIONAL
, EVEN
LY
SPACED
TOGGLE
BOLTS IN
THE MOU
NTING PLA
AREA.
Trim the
rear wall
templat
e along
the dotted
line.
Trim the
rear wal
l template
along th
e dotted
line.
%
$
&
(%76176
(14*14+<1
06#.
1765+
&'':*#756
%76*1.
'6*417)
*4'#49#
..(14'
:*#756
#ਸ਼
12"
4"
Darle vuel
ta a la hoja
para consu
ltar la
versión en
Español.
À 30 po de la surface de cuisson
Tracez une ligne sur
le mur arrière égale à
la profondeur de le
surplomb avant
FR-7
