background image

4

•  The refrigerator must be plugged into 

its own dedicated 115 Volt, 60 Hz, 

AC-only non-GFCI electric outlet. 

The power cord of the appliance 

is equipped with a three-prong 

grounding plug for your protection 

against electrical shock hazards. 

It must be plugged directly into 

a properly grounded three-prong 

receptacle. The receptacle must be 

installed in accordance with local 

codes and ordinances. Consult a 

qualified electrician. Do not use an 

extension cord or adapter plug.

•  If the power cord is damaged, 

it should be replaced by the 

manufacturer, service technician, or a 

qualified person.

•  Never unplug the refrigerator by pulling 

on the power cord. Always grip the 

plug firmly and pull straight out from 

the receptacle to prevent damaging 

the power cord.

•  To avoid electrical shock, unplug the 

refrigerator before cleaning and before 

replacing a LED light.

•  Performance may be affected if 

the voltage varies by 10% or more. 

Operating the refrigerator with 

insufficient power can damage the 

compressor. Such damage is not 

covered under your warranty.

•  Do not plug the unit into an outlet 

controlled by a wall switch or pull cord 

to prevent the refrigerator from being 

turned off accidentally.

Electrical information

Grounding type wall receptacle

Power cord with 3-prong 

grounded plug

Do not, under any 

circumstances,

cut, remove, or 

bypass the 

grounding prong.

Safety

WARNING

You must follow these guidelines to 

ensure that your refrigerator’s safety 

mechanisms are operating correctly.

IMPORTANT

To turn off power to your refrigerator, 

unplug the power cord from the wall 

outlet.

Summary of Contents for EI23BC37SS4













































Reviews: