Electrolux EHT 60418, Operating Instructions Manual, Page: 18 / 48

18 electrolux
Commissioning
Fig. 4
By-pass screw
When the hob has been fully installed it will be necessary to check the minimum flame setting.
To do this, follow the procedure below.
- Turn the gas tap to the MAX position and ignite.
- Set the gas tap to the MIN flame position then turn
the control knob from MIN to MAX several times.
If the flame is unstable or is extinguished follow
the procedure below.
Procedure:
Re-ignite the burner and set to MIN.
Remove the control knob, insert a thin
bladed screwdriver down the centre of the gas tap control shaft and turn the adjustment
screw until the flame is steady and does not extinguish, when the knob is turned from MIN
to MAX. Repeat this procedure for all burners.
)