background image

16

Check to see whether a fuse has 
blown.

Check to see whether the relay is 
switched off.

If the problem is not with the fuse or 
relay, do not attempt to correct it 
yourself.

Instead, contact our service network - 
all repairs must be performed by our 
service personnel.

Warranty

This unit is warranted against defects 
in materials and workmanship, when 
used as intended, for a period of one 
year from the date of purchase. The 
warranty covers both parts and service, 
as well as necessary transportation 
costs. Keep your proof of purchase.

Reservations

The warranty does not cover damages 
which are not due to defects in 
materials or workmanship. Repair, or 
attempted repair, by any party other 
than our authorized service network 
will invalidate the warranty. The 
warranty does not cover an unjustified 
house-call by our service network.

Service and spare parts

Service and repair of this unit must be 
carried out by our service personnel, or 

by an alternative service organisation, 
approved by the distributor. Only spare 
parts delivered by the distributor may 
be used. Spare parts and service are the 
domain of our service network.

If the unit does not work

Summary of Contents for EHP 634 X


















Reviews: