6.
CARE AND CLEANING
Clean the appliance after each use.
Always use cookware with clean bottom.
Scratches or dark stains on the
glass-ceramic cause no effect on
how the appliance operates.
To remove the dirt:
• –
Remove immediately
: melted plas-
tic, plastic foil, and food with sugar. If
not, the dirt can cause damage to
the appliance.
–
Remove after the appliance is
sufficiently cool:
limescale rings ,
water rings, fat stains, shiny metallic
discolorations. Use a special cleaning
agent for glass ceramic.
• The surface of the hob has horizontal
grooves. Clean the appliance with a
moist cloth and some detergent with a
smooth movement
from left to right.
• At the end
rub the appliance dry with
a clean cloth
.
7.
TROUBLESHOOTING
Problem
Possible cause
Remedy
You cannot activate the
appliance or operate it.
Activate the appliance
again and set the heat
setting in less than 10
seconds.
You touched 2 or more
sensor fields at the same
time.
Touch only one sensor
field.
The STOP+GO function
operates.
Refer to the chapter “Dai-
ly Use”.
There is water or fat
stains on the control pan-
el.
Clean the control panel.
An acoustic signal
sounds and the appliance
deactivates.
An acoustic signal
sounds when the appli-
ance is deactivated.
You put something on
one or more sensor fields.
Remove the object from
the sensor fields.
The residual heat indica-
tor does not change col-
ours.
The cooking zone is not
hot because it operated
only for a short time.
If the cooking zone oper-
ated sufficiently long to
be hot, speak to the serv-
ice centre.
The Automatic Heat Up
function does not oper-
ate.
The cooking zone is hot.
Let the cooking zone be-
come sufficiently cool.
The highest heat setting
is set.
The highest heat setting
has the same power as
the Automatic Heat Up
function.
ENGLISH
13
Summary of Contents for EHL8840FOG
Page 1: ...EHL8840FOG EN HOB USER MANUAL ...
Page 19: ...ENGLISH 19 ...