Electrolux EHG 30215, User Manual

Page: 27 / 68

Scratches or dark stains on the glass
ceramic have no effect on how the ap-
pliance operates.
• You can remove the pan supports to easily
clean the hob.
• To clean the enamelled parts, cap and
crown, wash it with warm soapy water.
• Stainless steel parts wash with water, and
then dry with a soft cloth.
• The pan supports are not dishwasher
proof; they must be washed by hand .
• When you wash the pan supports by hand,
take care when you dry them as the en-
amelling process occasionally leaves
rough edges. If necessary, remove stub-
born stains using a paste cleaner.
• Make sure you position the pan supports
correctly after cleaning.
• To make burners work correctly, make
sure that the arms of the pan supports are
in the centre of the burner.
• Be very careful when you replace the
pan supports to prevent the hob top
from damage.
After cleaning, dry the appliance with a soft
cloth.
Removing the dirt:
1. –
Remove immediately: melting plas-
tic, plastic foil, and food containing
sugar.
– Stop the appliance and let it cool
down
before you clean: limescale
rings, water rings, fat stains, shiny met-
allic discolorations. Use a special
cleaner for glass ceramic or stainless
steel.
2. Clean the appliance with a damp cloth
and some detergent.
3. At the end rub the appliance dry with
a clean cloth.
Periodic maintenance
Periodically speak your local Service Force
Centre to check the conditions of the gas
supply pipe and the pressure adjuster, if fit-
ted.
What to do if…
Problem Possible cause Remedy
There is no spark when lighting
the gas • There is no electrical supply • Make sure that the unit is con-
nected and the electrical sup-
ply is switched on.
• Examine the house electrical
installation fuse.
• Burner cap and crown are
placed uneven
• Make sure that the burner cap
and crown are in correct po-
sitions.
The flame is blow out immedi-
ately after ignition • Thermocouple is not heated
sufficient
• After lightning the flame, keep
the knob pushed for approxi-
mately 5 seconds.
The gas ring burns unevenly • Burner crown is blocked with
food residues
• Make sure that the injector is
not blocked and the burner
crown is clear of food parti-
cles.
If there is a fault, first try to find a solution to
the problem yourself. If you cannot find a sol-
ution to the problem yourself, speak your
dealer or the local Service Force Centre.
If you operated the appliance incorrectly,
or the installation was not carried out by
a registered engineer, the visit from the
customer service technician or dealer
may not take place free of charge, even
during the warranty period.
These data are necessary to help you
quickly and correctly. These data are
available on the identification plate from
the injectors kit.
• Model description .................
• Product number (PNC) .................
electrolux 27