Electrolux EHD6685P, Installation And Operating Instructions Manual

Page: 13 / 28

13
Safety cut-out
Cooking surface
• If after switching on the cooking surface, a heat
setting is not set for a cooking zone within approx.
10 seconds, the cooking surface automatically
switches itself off.
• If one or more sensor fields are covered for longer
than approx. 10 seconds, e.g. by a pan placed
upon it, a signal sounds and the cooking surface
switches off automatically.
• If all cooking zones are switched off, the cooking
surface automatically switches itself off after ap-
prox. 10 seconds.
Control panel
3
Moisture (e.g. a wet cloth) or liquid boiling over
onto the control panel immediately switches
all cooking zones off.
Induction cooking zones
• In the event of overheating (e.g. when a pan boils
dry) the cooking zone automatically switches itself
off.
_
is displayed. Before being used again, the
cooking zone must be set to 0 and allowed to cool
down.
• If cookware that is not suitable is used,
f
flashes
in the display and after 10 minutes the display for
the cooking zone switches itself off.
• If one of the cooking zones is not switched off after
a certain time, or if the heat setting is not modified,
the relevant cooking zone switches off automati-
cally.
Heat setting Switches off after
V, 1 - 2 6 hours
3 - 4 5 hours
5 4 hours
6 - 9 1.5 hours