Electrolux EHC321BA, User Manual

Page: 8 / 28

dishwashing liquid
scraper( option to buy)
scraper
Cleaning and care
Clean the appliance after each use.
Always use cookware with clean bottom.
Scratches or dark stains on the glass-
ceramic cause no e ect on how the
appliance operates.
To remove the dirt:
1. Remove immediately: melted plas
plastic foil, and food with sugar. If not,
the dirt can cause damage tothe
appliance. Use a special
for the glass . Put the on the
glass surface at an acute angle and
move the blade on the surface .
– Remove after the appliance is
su ciently cool: limescale rings ,
water rings, fat stains, shiny metallic
discolorations. Use a special cleaning
agent for glass ceramic or stainless
steel.
2. Clean the appliance with a moist cloth
and detergent.
3. At the end rub the appliance dry
with a clean cloth.
What to do if ...
Problem Possible cause and remedy
You cannot activate the appli-
ance or operate it.
Activate the appliance again and s e t the heat setting in 10 sec-
onds.
You touched 2 or more sensor elds at the same time. Only
touch one sensor eld.
There is water or fat stains on the control p anel. Clean the con-
trol panel.
A Sound operates and the ap-
pliance deactivates.
A sound operates when the ap-
pliance is deactivated.
You put something on one or more sensor elds. Remove the ob-
ject fro m the sensor elds.
The appliance deactivates.
You put something on the . remove object from the sensor
eld.
The residual heat indicator
does not comes on.
The cooking zone is not hot because it operated only for a short
time. If the cooking zone should hot, speak to the service cen-
tre.
comes on
The Automatic Switch O operates. Deactivate the appliance and
activate it again.
and number comes on.
8 electrolux
There is an error in the appliance.
Disconnect the appliance from the electrical supply for some
time. Disconnect the fuse from the electrical systems of the
house. Connect again, if come on again, speak to the
service centre.
tic
If you tried the above solutions and cannot repair the
problem,speak to your dealer or the Customer Care De-
partment. Give the data from the rating plate, Three-digit-
letter code for the glass ceramic (it is in the corner of
the cooking surface) and an error message that comes on. If you operated the appliance incorrectly, the servicing
by a customer service technician or dealer will not be
free of charge, even during the warranty period. The in-
structions about the customer service and conditions of
guarantee are in the guarantee booklet.