Electrolux EGG7422S, Instruction Manual

Page: 7 / 24

6
4. TOOLS
- Nut spinner No. 7
- Philip / Flat screw driver
- Spanner No. 15
- Nozzle cleaner
- Gas leak detector
- Needle for dirty removal from nozzle
5. REPAIR PROCESS
5.1 Remove out the dirty oil from nozzle
1. Clean the head of nozzle with the cloth
2. Use the nozzle cleaner or the needle insert into the hole of nozzle.
3. Do repeat the step 1 and 2 for a few time until the nozzle is clean.
5.2 Removal of Hob & Access to Internal Components
1. Isolate the appliance from battery power.
2. Remove trivets and burners from hob.
3. Remove the control knobs from the valve shafts.
4. Remove burner mount retaining screws, 2 screws per burner and 4 on the wok burner (2.5mm
Torque Screwdriver required).
5. For models with a separate button ignition system, remove the switch button and ignition pack
retaining nut. Alternatively, lift the hob sufficiently to access and release the ignition leads and
battery supply cable from the ignition pack.
6. The hob may now be lifted away from the appliance.