background image

CAUTION: The cooking process has to be supervised.

A short term cooking process has to be supervised

continuously.

WARNING: Danger of fire: Do not store items on the

cooking surfaces.

Metallic objects such as knives, forks, spoons and lids

should not be placed on the hob surface since they

can get hot.

Do not use a steam cleaner to clean the appliance.

If the glass ceramic surface / glass surface is cracked,

switch off the appliance to avoid the possibility of

electric shock.

In case of hotplate glass breakage:

shut immediately off all burners and any electrical

heating element and isolate the appliance from the

power supply,

do not touch the appliance surface,

do not use the appliance.

If the supply cord is damaged, it must be replaced by

the manufacturer, an authorized Service or similarly

qualified persons in order to avoid a hazard.

Where the appliance is directly connected to the

power supply, an all-pole isolating switch with a

contact gap is required. Complete disconnection in

compliance with the conditions specified in

overvoltage category III must be guaranteed. The

earth cable is excluded from this.

When you route the mains cable, make sure that the

cable doesn't come into direct contact (for example

using insulating sleeving) with parts that can reach

temperatures of more than 50°C above room

temperature.

WARNING: Use only hob guards designed by the

manufacturer of the cooking appliance or indicated by

the manufacturer of the appliance in the instructions

for use as suitable or hob guards incorporated in the

www.electrolux.com

4

Summary of Contents for EGC3313





















Reviews: